Recording in 432 Hz, 528 Hz and other frequencies
"Tuned to 432 Hz" almost always means the reference pitch A4 is set to 432 Hz instead of the standard 440 Hz. That's a small, simple change: −31.77 cents on your DAW's or synth's master tune. Every note moves together, so your chords and intervals stay the same.
Frequencies like 528 Hz or 963 Hz work differently, because they aren't A. To make one of them land exactly on a note, you pick the nearest note and retune the reference so that note hits the frequency: 528 Hz is C5 when A4 is 444 Hz (+15.64 cents). Some, like 963 Hz, sit almost halfway between two notes, so many producers keep standard tuning and add the frequency as a drone instead.
What is a cent?
A cent is one hundredth of a semitone. 100 cents is one semitone, and 1200 cents is an octave. The formula is cents = 1200 x log2(f1 / f2), which is what this guide uses.
Does the tuning change the key?
No. Moving A4 from 440 to 432 Hz shifts everything down by about a third of a semitone. Your track is still in the same key; it just sits slightly lower in pitch.
Can I retune a song I've already finished?
Yes: pitch-shift the whole mix by the master-tune value. For small amounts like −31.77 cents a good pitch shifter is usually transparent. For larger shifts, retuning the instruments before you export sounds cleaner.